TeraTurtle LT0 Premium Protective Case – 20 Capacity (No jewel case)
- physical damage from impact
- tape distortion from wound-in debris
- fast and large changes in temperature and humidity
- Waterproof
- Superior cushioning and no exposed foam or debris generating agents
- Individual slots for each tape
- Dustproof
- ATA Impact certified
- Stainless steel hardware
- Double movement latches prevent accidental opening
- Double padlockable
- 3 Years Warranty
Compatible Locks
- Turtle Lock – 5020
- Turtle Lock – 6000
- Turtle Lock – TSA
Certifications
Waterproof IPX7
Dustproof IP6X
Impact ATA 300
Drop Test ASTM D-4169 CC-18
Vibration STM D-4169 DC-18
Rainfall ASTM D-4169 DCc-18
Immersion MIL-STD-810F
Descriptions of Tests
ATA Specification 300 Category 1
Airline transport container suitable for a minimum of 100 airline trips
Impact Resistance Test; samples were exposed to impact using a bar weighing 13.2lbs with a hemispherical end of 3.2cm. Bar was dropped with its longitudinal axis vertical on to each sample’s weakest point from a height of 0.5m. Samples were conditioned to a temperature of -20°C before impact exposure.
ASTM D-4169 DC-18
Level 1 Schedule A Handling (Manual)
Drop tests – a series of drops on each edge, corner and face of the case from a height of no less than 48cm(19”) and with loads of 6.8-31.8kg(15-70lbs) determined by case size. Samples were conditioned at lab ambient conditions and then temperatures of -28°C and +60°C for a minimum of 3 hours at each condition.
ASTM D-4169 DC-18
Level 1, Schedule F loose load vibration
Vibration – The cases are tested using test method D-999 to determine the ability to withstand the repetitive shocks occurred during transportation of loose loads.
ASTM D-4169 DC-18
Level 1, Schedule H Environmental Hazard Rainfall
Simulated rainfall for 2hrs at a rate of 10cm/hr (4”). Samples were conditioned to -20 degrees C and +52 degrees C.
MIL-STD-810F
Method 512.4
Immersion – The case is submerged in a basin of water to a depth of 1 meter (3.28 ft) to the top most part of the case for 30 minutes. The case is heated to 10 degrees F higher than the temperature of the water.
IP 67 ingress protection
6- Total protection from dust
7- Protected against the effects of immersion between 15cm (5.9”) and 1m (39.37”)
The durable, rugged Tera Turtle 20 Capacity LTO Ultrium Case from Turtle Case features an airtight, waterproof design to protect up to 20 LTO tape drives . Inside the case you will find slots to hold the tape cartridges without their jewel cases. Additionally, the interior design helps to keep the tapes secure during transport to reduce the chance the tapes become damaged. The exterior of the case features stainless steel hardware, secure latches, and spots to place padlocks for added security.
Turtle Tera Turtle Specs
| Waterproof | No |
| Fireproof | No |
| Tape Format | LTO Ultrium |
| Dimensions | Inside Dimensions: Not specified by manufacturer Outside Dimensions: 15.8 x 12.4 x 6.8″ / 40.1 x 31.5 x 17.3 cm Carton Dimensions: 16.0 x 13.0 x 7.0″ / 40.6 x 33.0 x 17.8 cm |
| Weight | 4.4 lb / 2.0 kg |
| Package Weight | 6.35 lb |
| Box Dimensions (LxWxH) | 16 x 13 x 7″ |




